Size chart

This size guide covers the Speedo DMC Super Fin — a versatile fin for water enthusiasts looking for a soft, comfortable, and flexible fin. Perfect for fitness swimming and bodysurfing, the Super Fin features softer SILFORM material that provides maximum comfort, reduces fatigue, and increases speed with gentle kicking action, a universal foot cavity for quick and easy on/off transitions from deck to pool or sand to sea, DMC's patented Reverse V Rail (RVR) Technology for correct torque and maximum speed, and a bottom centre drain chute for even water dispersion. Available from 5XS (junior) through to XXL.

Shop Speedo DMC Swim Fins →
Sizing Explained — DMC Fins

All feet are very different, so fitting a foot into a fixed shape foot cavity of moulded flexible material is an inexact science. Whilst DMC fins do not correlate directly to shoe sizes — as the construction of fins and shoes are very different — a close-to shoe size is provided as a secondary guide.

Please note: each DMC model has its own mould, so sizes may vary between models. The Original and Super Fin have a universal foot cavity, meaning you can wear either fin on either foot, giving a wider foot cavity. The Elite and Elite Max are specific left and right foot — always check the L/R markings before putting them on.

Tip: to test your fin size, sit on a chair, extend your legs and flex your ankle/foot out — this is your swimming position. Fins are not shoes so standing in them will not give an accurate size test.

How to Measure — DMC Super Fin
How to measure foot length for DMC Super Fin

Measure your foot length to find the correct fin size. Do not rely on shoe size alone — always measure foot length for the most accurate fit.

  1. 1
    Stand on a piece of paper with your toe against a wall. Make a mark at the end of your heel (in the achilles arch) — this is where the fin strap sits.
  2. 2
    Measure the distance from the wall to your heel mark in millimetres. This should be approximately 3–5mm less than your total foot length — this is the measurement to use in the size table.
  3. 3
    If your measurement falls between two sizes, size up for a more comfortable fit.
Sizing Table — Speedo DMC Super Fin
5XS 4XS 3XS 2XS XS S M-S M M-L L XL XXL
UK Shoe Size (Unisex)
UK Shoe Size 5.5–7.5 Jr 7.5–10.5 Jr 10.5–13.5 Jr 1.5–2.5 3.5–4.5 5.5–6.5 6.5–7.5 7.5–8.5 8.5–9.5 9.5–10.5 11.5–12.5 13.5–14.5
Foot Length
Foot Length (mm) 175 185 195 215 230 240 250 260 270 280 290 300
Foot Length (inches) 6.89 7.28 7.68 8.46 9.06 9.45 9.84 10.24 10.63 11.02 11.42 11.81

Jr = Junior shoe sizes. The Super Fin has a universal foot cavity — either fin fits either foot. If you are between sizes, size up.

How to Put On Your DMC Fins

DMC fins are made of a silicone-based material which offers maximum comfort. Like most polymers, care is required when putting the fin on to avoid overstretching the strap.

  1. 1
    Push the fin as far onto the foot as possible before pulling the strap — never pull the strap first.
  2. 2
    Lift the strap over the heel — do this gently and evenly to avoid stretching one side more than the other.
  3. 3
    Adjust for comfort — the fin pocket should feel secure but not tight. If the fin feels painful or restricted, try the next size up.

DMC fins are made from SILFORM silicone — a maximum comfort material. Avoid exposing fins to abrasive materials or sharp objects which can damage the silicone.

Frequently Asked Questions — Speedo DMC Super Fin

Stand on a piece of paper with your toe against a wall. Mark the end of your heel at the achilles arch — this is where the fin strap sits. Measure from the wall to your mark in millimetres. This should be approximately 3–5mm less than your full foot length. Use this measurement to find your fin size in the table above. If you fall between sizes, choose the larger size.

If your foot length falls between two sizes, always size up. Fins that are too tight can cause blisters, cramp, and discomfort during training. The silicone material will bed in slightly with use and mould to the shape of your foot over time. Speak to a member of staff at Allens if you are unsure.

Rinse the fins thoroughly in clean fresh water after every use to remove chlorine, salt, and debris. Store flat in a cool, dry location away from direct sunlight. Do not fold or crease the blade during storage. Avoid walking on rough surfaces such as pool surrounds or concrete as this can damage the fin blade and silicone material.

DMC fins can be used in both pool and open water environments. However, they are primarily designed for pool training and bodysurfing. Always ensure fins are properly secured before entering open water, and avoid walking on sand or rough surfaces which can accelerate wear on the silicone blade.

No. The DMC Super Fin has a universal foot cavity, meaning either fin can be worn on either foot. This makes them quick and easy to put on and remove during transitions from deck to pool or sand to sea, and provides a wider foot cavity suitable for a broad range of foot shapes.

SILFORM is DMC's proprietary silicone-based material. Compared to standard silicone, SILFORM is softer and more flexible, providing maximum comfort and reducing fatigue during extended use. It is particularly well suited to fitness swimmers and bodysurfers who wear fins for longer periods and need a material that cushions the foot without sacrificing propulsion.

Yes. The Super Fin is available from 5XS (approximately EU 27 / UK 5.5–7.5 Junior), making it suitable for children from around age 5 upwards. Always measure foot length rather than relying on age or shoe size. The universal foot cavity and soft SILFORM construction make it a very comfortable choice for younger swimmers and those new to training fins.

The Super Fin uses softer SILFORM material and RVR technology with a universal cavity — it is the most versatile and comfortable fin in the range, ideal for fitness swimming and bodysurfing. The Original Fin is firmer with a closed heel pocket for lap swimmers. The Elite uses a V Rail design for competitive swimmers. The Elite Max is the most performance-oriented with RVR technology and a left/right specific cavity for maximum speed.

Related Products

Recently Viewed Products